Waterproof Deck Systems
Typical uses for this system is for plywood decks, walkways, balconies, stairs, landings. Normally specified for apartments, condos, office buildings, and residential. This system consists of wire metal lathe, installed over a 40 mill thick rubberized asphalt self sealing, self adhering, waterproof membrane. The wire lathe is installed over the Seal Guard Membrane, then stapled through the membrane into the plywood. The membrane self seals around the staples. The wire lathe adds shear strength to substrate, and covers rough plywood and seams as well as good sound reduction Qualities. Also can be installed over existing systems. This system is available in a variety of patterns, textures and colors.

Texture Crete
Texture Crete is a specially formulated product designed to give new life to old concrete. The surface is easy to keep clean and anti-skid which makes it perfect for pool decks, patios and driveways. It is available in a variety of colors including lighter shades that stays cooler in the hot summer sun.

Texture Crete permanently bonds to the cement because the special preparation technique that opens up the pores of the concrete. This allows the primer to penetrate deep into the concrete. Then the plyacrylic cement is blended and applied to the surface. After the desired texture is achieved, the protective topcoat is applied.

The Texture Crete process is designed to be installed as a finishing touch with minimal amount of disturbance. The complete process usually only takes a few days. The surface dries in hours to regain access, making it perfect for entryways.

Epoxy and Acid Staining
Designed to be used on concrete, metal, masonry, or wherever a tough, chemical resistant finish is needed. These epoxy systems provide high build, maximum toughness, high gloss, excellent chemical resistance and durability. We offer a variety of colors, textures, patterns and looks, whether it is a garage floor, the interior of your house, or in commercial or industrial situations (wine caves, kitchens, warehouse floors, wineries, coffee houses, clothing stores. etc.).

Concrete Restoration and Micro-Toppings
We have a wide variety of polymer cements and micro-toppings that we use to resurface old existing concrete slabs as well as new concrete too! We also use epoxys to repair cracks, and we have an isolation system to keep cracks from coming back. We have a 79% success rate with this isolation system, and are one of the few companies that actually repairs cracks, not just coats over them! Our polymer cements are usually installed in mill thickness so we don't have height issues to worry about. We can also fill, level, and slope up to 4" thick typically, and we can go up to 12" in some cases. With polymers and micro-toppings we can create unlimited textures, patterns and colors.